|
× |
 |
MAZAK VTC 300 II |
|
× |
 |
CREVOISIER C501 |
|
× |
 |
MECOF CS8
- Table size : 6000 x 1000 mm
- Spindle speed : 1200 RPM
- Longitudinal stroke - X : 5000 mm
- Cross travel - Y : 1000 mm
- Vertical stroke - Z : 800 mm |
|
× |
 |
GSP 405 T 125
- Distance between column and spindle center : 1250 mm
- Carriage stroke : 950 mm
- Morse taper : CM4
- Maximum drilling radius : 1400 mm mm
- Min. drilling radius : 465 mm mm
- Arm vertical stroke : 500 mm
- Spindle speed : 40 à 1800 RPM
- spindle feed : 0.045 à 0.5 mm/mn
- Max. height under spindle : 1440 mm
- Minimum height under spindle : 615 mm
- Base clamping surface : 1315 x 800 mm |
|
× |
 |
REFORM AR 75 8M
- Year : 1996
- Longitudinal travel : 7500 mm
- Maximum height : 300 mm
- Magnetic plate : 2x3000x500 mm
- Grinding wheel diameter : 600 mm
- Grinding wheel size : des segments 103/94x34x180 mm
- Max automatic down feed : 0,001 mm
- Capacity : 75 T
- Dimensions : 12500x2400x2200 mm |
|
× |
 |
ARO Saldatrice
- Model : PA12B8C
- Year : 1997
- Throats length : 800 mm
- Weight : 632 Kg |
|
× |
 |
LARENN |
|
× |
 |
Hydraulic press |
|
× |
 |
CUV KENT KMV 16
- Year : 2011
- Travel of the axe X : 1600 mm
- Travel of the axe Y : 800 mm
- Travel of the axe Z : 800 mm
- C.N.C. : FANUC 18iMB
- Quick feed rate : 15/15/12 mm/mn
- Table size : 1700 x 800 mm
- Number of T-slots : 5
- Maximum width of T-slot : 22 mm
- Spindle speed : 30 à 4500 RPM
- Spindle nose : NT-50
- Power : 7 KW
- Spindle power : 18,5 KW
- Number of tools : 24
- max size of the tools : 110 x L350 mm
- Max weight of the tools : 15 kgs
- Weight : 14000 Kg
- Dimensions : 4170 x 3450 x 3250 mm |
|
× |
 |
HACO PPM 20-75
- Maximum pressure (T) : 75 Tons
- Working length : 2100 mm
- Distance between uprights : 1600 mm
- Stroke : 100 mm
- Distance between table and ram : 300 mm
- Motor power : 7.5 HP
- Weight : 4 400 Kg
- Working speed : 8 mm/s |
|
× |
|
HACO PPM 20-75
- Maximum pressure (T) : 75 Tons
- Working length : 2100 mm
- Distance between uprights : 1600 mm
- Stroke : 100 mm
- Distance between table and ram : 300 mm
- Motor power : 7.5 HP
- Weight : 4 400 Kg
- Working speed : 8 mm/mn |
|
× |
 |
RAS 2120
- Maximum thickness : 1.5 mm
- Maximum height of the edges : 15 mm
- Minimum height : 6 mm
- diameter of the rollers : 76 mm
- Minimum 90° bending on elbow radius : 100 mm
- Bending radius on 180° elbow and disk : 130 mm
- Motor power : 1.1 HP
- Dimensions : 800x800x1300 mm
- Weight : 200 Kg |
